Finished the first kit of 2019, an Italeri H-21. I’m glad this came out in 1/48 scale as it, with the H-13, were helicopters of my youth.
At the start of the year, I had some lofty goal to build two per month. What was I thinking?! Going to have to play catch-up now!
The kit overall will take some work to turn it into an AMS masterpiece. There were a number of fit problems all around; the canopy to the fuselage, the cockpit in the fuselage, and the engine and bulkheads. Other than sanding the fuselage seams I didn’t put too much work into the fit. The place the rear rotor attaches also looks like it had something wrong with the molding.
After assembling the kit it was sprayed with my favorite lacquer primer from the can which produces a dark grey finish. To try something different I then took some thinned Vallejo white primer and pre-highlighted sections of the kit. I then sprayed the kit Vallejo Russian Green (it looked the best to me for a 50’s Army color) and you can see the results of the pre-shading worked pretty well.
The decals went on great over a coat of Future and settled down very well to Solvaset. I put most of the stencils on as the yellow just looked right on Olive Drab. I had to cut the main stars and bars as I put the rear landing gear on first to paint them with the kit but the S&B go on under the rear gear mounts. Oops!
A raw umber overall wash and when dried a coat of Testors Dullcoat to finish her off!
One other warning. I broke four of the six rotors. They are very fragile. Managed to drill them out and add brass tubing to support but handle with care.
Fun to finally add a 1/48 chopper to my collection, one that I used to see at the airshows at Lowery AFB in Denver growing up!